BH GSO ASTM D5759:2023

ASTM D5759:12(2020)
Bahraini Standard   Current Edition · Approved on 05 April 2023

Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses

BH GSO ASTM D5759:2023 Files

English 0 Pages
Current Edition Reference Language

BH GSO ASTM D5759:2023 Scope

1.1 This guide recommends standards for the characterization of fly ash from the combustion of coal, fly ash from coal combusted in the presence of alkaline materials, and fly ash from combusted coal in which the flue gases have been treated with alkaline materials in the presence of the fly ash. 1.2 This guide provides recommended and optional test methods for fly ash evaluation. Acceptance criteria can be negotiated between the producer and the user according to the potential end use. 1.3 The coal fly ash and clean coal combustion fly ash of this guide do not include the following: 1.3.1 Dusts from kilns producing products such as lime, portland cement, activated clays, etc.; 1.3.2 By-products of flue gas desulflurization that are not collected with the primary fly ash removal equipment such as the baghouse or electrostatic precipitator; and 1.3.3 Fly ash or other combustion products derived from the burning of waste; municipal, industrial, or commercial garbage; sewage sludge or other refuse, or both; derived fuels; wood; wood waste products; rice hulls; agriculture waste; or other non-coal fuels or other such fuels blended with coal, or some combination thereof. 1.4 Fly ash may contain some trace elements that may affect performance or potential end use. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Best Sellers From Construction and Building Sector

GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
BH GSO 1427:2024
GSO 1427:2008 
Bahraini Standard
Ceramic Sanitary Appliances - Western Water Closets
BH GSO 2489:2017
GSO 2489:2015 
Bahraini Standard
Specifications of Recycled Aggregates from Construction Waste to be used in construction Works

Recently Published from Construction and Building Sector

GSO ASTM C1170/C1170M:2026
ASTM C1170/C1170M:20 
Gulf Standard
Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
GSO EN 13888-1:2026
EN 13888-1:2022 
Gulf Standard
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
GSO ISO 16535:2026
ISO 16535:2019 
Gulf Standard
Thermal insulating products for building applications — Determination of long-term water absorption by immersion
GSO ISO 13824:2026
ISO 13824:2020 
Gulf Standard
Bases for design of structures — General principles on risk assessment of systems involving structures